Views: 0 Author: Site Editor Publish Time: 2023-07-07 Origin: Site
When refuelling a refillable LPG cylinder, you should park up to three metres
away from the bulk storage tanks; then apply the handbrake and turn the engine off.
Once you’ve checked the content gauge to see if it needs to be refilled, attach
the filling hose and gun from the bulk tank installation to the filler valve on the cylinder.
You should check the connection on both the hose and the filler valve to make sure they
are in good condition.
Now the hose and gun are connected, you can open the bleed valve that is on the
refillable cylinder; there should be a small release of gas and once that has happened,
you can then start conveying liquid by using the dead man switch on the installation.
When you start seeing liquid appear, which will be shown with a white jet coming
out the bleed valve, stop filling immediately and close the bleed valve. Then depress
the gun to release it and make sure the connection is depressurised. Once you’ve stowed
the hose and gun away, return to the cylinder to put the filler valve cap back on.